Sign Post 90in Tall with 6in Square Baseplates for Surface Mounting
90" Tall Rectangular Sign Post Designed for Traffic Control Signs
The 60" signpost is made with extruded aluminum. The post has an 0.080 wall thickness with a Duranodic Bronze finish, custom paint colors are available. This sign-post features a mounting slot on one side for sign mounting with an end cap and locking square to secure the sign in place. The post has s 6" x 6" aluminum base plate for surface mounting.
- Dimensions: 90" H x 6" W x 6" D with base plate
- Post size: 2¼" x 3 x 90"
- Base plate" 6" x 6" x 3/16" thick with predrilled anchoring holes
- Weight: Approximately 14 lbs
- Finish: Duranodic Bronze
- Material: Extruded aluminum post with one sign mounting channel
- Sign mounting hardware and set screw for securing sign to post is included
Sign Post Mounting Recommendations
- Single Post: Use a single post to center or flag mount signs up to 26"wide. A bracket for attaching the post to the sign will be installed on the sign at the factory.
- Double Post: Use post with or without a base plate to side mount or projection mount for signs wider than 26". Posts should be mounted to one or both sides of the sign and travel the full width of the sign.
- Hanging Sign: Use single or double posts with a base plate for hanging a sign from the ceiling, pendant style.
- Projection Mount: Use single or double posts with a base plate for projection mounting.
Posts with base plates are available in three standard lengths: 40", 60", and 90" or in custom lengths up to 90". Posts for direct burial mounting (without base plates) are available in four standard lengths: 40", 60", 90" and 120" or in custom lengths up to 120".
|Google Product Category||Business & Industrial > Signage|
|Custom Stock Message||In Stock, Ready to Ship|